* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
1. Set Starting Voltage:in normal display voltage state,press the button will display start charging voltage;long press for 3s the digital tube will flash;you can start or stop button to set starting up charge voltage value
2. Set Stop Voltage:in normal display voltage state,press the button will display stopping charge voltage;long press the button for 3s the digital tube will flash;you can start or stop button to set stopping charge voltage value
3. Factory Reset:in power on state press the start/stop button at the same time,digital tube will display 888;that represents factory reset settings
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-2 of 2|
Show Original
A part of the QA has been auto-translated.
0
Q:
How can this unit support 24Vdc when the smart relay from Wangll is marked 14Vdc?
How can this unit support 24Vdc when the smart relay from Wangll is marked 14Vdc?
The relay is rated at 14V and 20A DC, so if you double the voltage then halve the current and you should be fine.
The relay is rated at 14V and 20A DC, so if you double the voltage then halve the current and you should be fine.
Answered by FondofBlondes on 21/12/2023Helpful (0)
0
Q:
How critical is the 30 volt input limit? I want to be charging 24 volts of lithium batteries and the output voltage has to reach about 28.6 volts. This means that there is very little headroom between 30 volts and 28.6. What components in the module are critical for the 30 volt limit?
How critical is the 30 volt input limit? I want to be charging 24 volts of lithium batteries and the output voltage has to reach about 28.6 volts. This means that there is very little headroom between 30 volts and 28.6. What components in the module are critical for the 30 volt limit?