1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
ຮັບປະກັນຄວາມປອດໄພໃນການຊຳລະ
>>>MANUAL: Click here to open<<<
>>>Firmware: Click here to open<<<
SA5 Product Features:Screen Size: 4 inches IPS LCD, featuring a large knob for easy operation.Spectrum Analyzer: Normal mode: 0.1-800MHz, Ultra mode: provides level calibration up to 5.3GHz, and can observe signals up to 12GHz. Signal Generator: Outputs sine waves between 0.1-800MHz, square waves up to 4.4GHz, or RF test signals up to 5.3GHz when not used as a spectrum analyzer.Switchable resolution bandpass filters: from 200Hz to 850kHz.Optional LNA: Built-in 20dB Low Noise Amplifier (LNA).Spectrum Display: Display up to 450 points, Display four independently configured traceStorage: MicroSD card slot for storing measurements, settings, and screen captures(SD card Not includes).
Input Attenuator: Step attenuator adjustable from 0dB to 31dB (not usable with LNA).Calibration: Includes a built-in calibration signal generator for automatic self-test and input calibration.PC Connectivity: Connects via USB to function as a PC-controlled spectrum analyzer or signal generator.Battery: 5000mA, Rechargeable battery providing at least 10 hours of portable use.Max Input Level: +10dBm. Ensure not to exceed this to avoid damage.
Specifications:
Specification | Details |
Input Frequency Range | 100kHz to 800MHz in normal mode; up to 6GHz with ULTRA mode enabled |
Input Impedance | 50 ohm when input attenuation set to 10dB or more |
Input Attenuation | Selectable manual and automatic input attenuation between 0dB and 31dB in 1 dB steps when LNA not active |
Maximum DC Input | ± 5V DC |
Absolute Maximum Input Level | +6dBm with 0dB internal attenuation |
Absolute Maximum Short-Term Peak Input Power | +20dBm with 30dB internal attenuation |
Suggested Maximum Input Power | +0dBm with internal attenuation in automatic mode |
Best Measurement Input Power | Below -25dBm |
Input Intercept Point (IIP3) | +15dBm with 0dB internal attenuation |
1dB Compression Point | -1dBm with 0dB internal attenuation |
Power Detector Resolution | 0.5dB |
Linearity vs Frequency | ± 2dB below 5.3GHz, ± 5dB between 5.3GHz and 6GHz |
Absolute Power Level Accuracy | ± 2dB after power level calibration |
Built-in Optional LNA | 20dB LNA with Noise Figure of 5dB |
Lowest Discernible Signal without LNA | -102dBm at 30MHz using a resolution bandwidth of 30kHz |
Lowest Discernible Signal with LNA | -145dBm at 30MHz using a resolution bandwidth of 200Hz |
Frequency Accuracy | Equal to the selected resolution bandwidth |
Phase Noise | -108dB/Hz at 100kHz offsetand -115dB/Hz at 1MHz offset@ 30MHz |
Spur-Free Dynamic Range | 70dB when using a 30kHz resolution bandwidth |
Resolution Filters | 0.2, 1, 3, 10, 30, 100, 300, 600, and 850 kHz |
On-Screen Resolution | 51, 101, 145, 290, or 450 measurement points |
Scanning Speed | Over 1000 points/second using largest resolution filters |
Automatic Optimization of Scanning Points | Ensures coverage of the whole scan range regardless of the chosen resolution bandwidth |
Spur Suppression Option | For assessing if certain signals are internally generated or actually present in the input signal |
Headphone Output | For listening to the demodulated audio (AM only). Stereo connector only, high impedance is louder, short protected |
Package includes:
1 x 100k-5.3GHz Signal Generator
A part of the review has been auto-translated.
Ikke testet endnu. Kun tændt for den.
Received the analyzer faster than promised date and it is very well packaged, thanks Banggood! Only tested the basic functions and it appears of quality build and functionally almost identical to the TinySA Ultra. I like the large encoder knob on the front, providing easier and smoother operations. Battery seems to be higher in capacity than the TineSA Ultra, hopefully it will make the SA last longer.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.