* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Warm Reminder: This product cannot be shipped during the Spring Festivall (2025.1.23-2.05). We will process the shipment for you as soon as possible after the holiday. We apologize for the inconvenience caused to you.
Arkbird-DJI has high-sensitivity 5.8G 32CH receiver connecting the analog signals to HD glasses, allowing DJI glasses to support analog image transmission, plug and play, and easy to use. Just pull it out when you donu2019t need the analog. Compatible with DJI v1 and v2 glasses.
Specification
Input voltag: 7.4-17.6S (with DJI power cord)
Output voltag: the same as the input, while supplying power to DJI glasses.Module size with receiver: 60*28*12MM
Test
Distance test: Compared with the Eagle Eye dual-antenna receiver, the distance is more than 90%. Sensitivity is good. Comparison test of different antennas: the FatShark antenna (clover antenna) has the best distance, and the TBS Black Sheep 5.8G antenna is similar to the stick antenna.(Note: For reference only, different electromagnetic environments will affect the distance)
Build quality may be not the greatest, but it is exactly what I needed.
Works
Has a holder for quick removal from goggles. Wires are exact length to be just enough. Setting channel worked as expected from the first try.
Power cable center pin was a bit loose, adjusted it with needle. No other problems
Build quality may be not the greatest, but it is exactly what I needed.
Works
Has a holder for quick removal from goggles. Wires are exact length to be just enough. Setting channel worked as expected from the first try.
Power cable center pin was a bit loose, adjusted it with needle. No other problems
Build quality may be not the greatest, but it is exactly what I needed.
Works
Has a holder for quick removal from goggles. Wires are exact length to be just enough. Setting channel worked as expected from the first try.
Power cable center pin was a bit loose, adjusted it with needle. No other problems
the receiver Is perfectly housed on the side of my dji goggle V2 and using the jumpers on his surface Is possible set the correct frequency. Is a cheap way to use the old but still loved old analogo drone not yet upgraded to the digital system.
the receiver Is perfectly housed on the side of my dji goggle V2 and using the jumpers on his surface Is possible set the correct frequency. Is a cheap way to use the old but still loved old analogo drone not yet upgraded to the digital system.
the receiver Is perfectly housed on the side of my dji goggle V2 and using the jumpers on his surface Is possible set the correct frequency. Is a cheap way to use the old but still loved old analogo drone not yet upgraded to the digital system.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.