* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
It's 1 or 2 mm wider than the original servo, but it should fit if you file the mounting bracket a bit. Make sure you have a receiver with standard connectors.
It's 1 or 2 mm wider than the original servo, but it should fit if you file the mounting bracket a bit. Make sure you have a receiver with standard connectors.
Answered by Jeremy on 06/07/2020Helpful (0)
0
Q:
16/5/21: What’s the maximum degrees of movement with a standard RC radio receiver’s (1000µs to 2000µs) pulse width please?
16/5/21: What’s the maximum degrees of movement with a standard RC radio receiver’s (1000µs to 2000µs) pulse width please?
Second reminder.
Is it so difficult to get an anser on a simple question?
Quote: Reminder. Last Sunday 2. May, I asked for advise to enlarge the dead zone of the servo 8482 MIG-D. I have bought 4 and intend to use them in a model dragline. Therefore they must be less sensible. Can you give advise, also about the required soft- and hardware? Awaiting your answer. Henk, mail *****
Second reminder.Is it so difficult to get an answer on a simple question?Quote: Reminder. Last Sunday 2. May, I asked for advise to enlarge the dead zone of the servo 8482 MIG-D. I have bought 4 and intend to use them in a model dragline. Therefore they must be less sensible. Can you give advise, also about the required soft- and hardware? Awaiting your answer. Henk, mail *****
To change the dead zone, you need to buy a programming card and software. This configuration card can be used to adjust the dead zone: VOTIK servo programming card can be used for ***** ***** ***** *****
To change the dead zone, you need to buy a programming card and software. This configuration card can be used to adjust the dead zone: VOTIK servo programming card can be used for ***** ***** ***** *****
Answered by Scottybman Offing on 03/06/2021Helpful (0)
0
Q:
Reminder.
Last Sunday 2. May, I asked for advise to enlarge the dead zone of the servo 8482 MIG-D.
I have bought 4 and intend to use them in a model dragline.
Therefore they must be less sensible.
Can you give advise, also about the required soft- and hardware?
Awaiting your answer.
Henk, mail *****
Reminder.
Last Sunday 2. May, I asked for advise to enlarge the dead zone of the servo 8482 MIG-D.
I have bought 4 and intend to use them in a model dragline.
Therefore they must be less sensible.
Can you give advise, also about the required soft- and hardware?
Awaiting your answer.
Henk, mail *****
To change the dead zone, you need to buy a programming card and software. This configuration card can be used to adjust the dead zone: VOTIK servo programming card can be used for ***** ***** ***** *****
To change the dead zone, you need to buy a programming card and software. This configuration card can be used to adjust the dead zone: VOTIK servo programming card can be used for ***** ***** ***** *****
Answered by Spartan0 on 03/06/2021Helpful (0)
0
Q:
The servo is digital programable.
Can you tell me how to change, enlarge, the dead band?
Do I need additional equipment?
The servo is digital programable.
Can you tell me how to change, enlarge, the dead band?
Do I need additional equipment?
This requires a separate programming card, plus a program, connect the programming card with the data cable, connect the programming card to the servo, and then use the software to adjust the dead zone, speed, and torque of the servo on the computer.
This requires a separate programming card, plus a program, connect the programming card with the data cable, connect the programming card to the servo, and then use the software to adjust the dead zone, speed, and torque of the servo on the computer.
Answered by The seller on 29/05/2021Helpful (0)
0
Q:
I ordered VOTIK 8482 servos, sell metal arms for this servo model?
Ordené servos VOTIK 8482, vender brazos metálicos para este modelo de servo ?