* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
Product introduction:This is a simple oscilloscope made with an STC8A8K microcontroller. It only requires a small amount of components and is easy to assemble. The function can cover simple measurements. This kit aims to build a basic oscilloscope model with the simplest possible principles and as little hardware as possible. The source code is easy to understand, and it is also very suitable for interested electronic enthusiasts to learn and research while using the product.
*Trigger level: For repetitive signals, the trigger level stabilises the display. For single-shot signals, the trigger level captures it.*Trigger Slope: The trigger slope determines whether the trigger point is on the rising or falling edge of the signal.*Trigger Mode:*Auto Mode: continuous scanning. Click the encoder to stop or run sampling. If triggered, the waveform will be shown on the display and the trigger position will be placed in the centre of the graph. Otherwise, the waveform will scroll irregularly and display "Fail".*Common Mode: After the pre-sampling is completed, you can input the signal. If triggered, the waveform will be shown on the display, waiting for a new trigger. If there is no new trigger, the waveform will be kept.*Single Mode: After the pre-sampling is completed, the signal can be input. If triggered, the waveform is displayed and the sampling is stopped. User needs single point encoder to start the next sampling.*When in common mode and single mode, make sure the trigger level has been adjusted correctly, otherwise the waveform will not be shown on the display.*Indicator light: Normally the indicator light is on to indicate that sampling is running. *Save Setup: When exiting the setup interface, all parameters of the setup interface and main interface will be saved in EEPROM.
Nice DIY kit for SMD soldering practice. The range of applications is quiet limited due to small bandwidth, but I have ordered it just for fun and practice with SMD components.
Nice DIY kit for SMD soldering practice. The range of applications is quiet limited due to small bandwidth, but I have ordered it just for fun and practice with SMD components.
Nice DIY kit for SMD soldering practice. The range of applications is quiet limited due to small bandwidth, but I have ordered it just for fun and practice with SMD components.
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-3 of 3|
Show Original
A part of the QA has been auto-translated.
0
Q:
Assembly and User Guide download doesn't work. Where can I get it from?
Assembly and User Guide download doesn't work. Where can I get it from?<br/>I have tried the 56dz website but the supplied password for the download doesn't work either.
You can check whether your browser has disabled the banggood pop-up window. Or your browser's defense is too high, which makes the document unable to download.
You can check whether your browser has disabled the banggood pop-up window. Or your browser's defense is too high, which makes the document unable to download.
Answered by Nexet7 on 04/05/2025Helpful (0)
0
Q:
There should be a version offered with pre-soldered SM components for those of us who are not used to dealing with this type of component.
There should be a version offered with pre-soldered SM components for those of us who are not used to dealing with this type of component.<br/>I have bought two of these and neither work probably due to my soldering.<br/>Is this option planned in the future?