1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
ຮັບປະກັນຄວາມປອດໄພໃນການຊຳລະ
A part of the review has been auto-translated.
The output of this board can oscillate when the slot in the wheel is half open - half closed. The designer added a 100nF capacitor across the photo transistor but that makes the situation worse.
To fix this problem, the capacitor closest to the edge of the board should be removed and a 33k resistor must be added between output (pin7) and the non-inverting input (pin5).
I will post the schematic in a second.
Note: if you poll the output in your software, you can omit the modification. But if you use an interrupt or clock-input, this mod is necessary.
The Product works as it is said in the description:
It does not give you speed (speed calculations have to be done by the micro-controller) so the name "Speed Measuring Sensor" is a bit off.
these modules could also be used as optical endstops for 3D printers
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
A part of the QA has been auto-translated.